Design
Submersible pump for stationary and portable wet well installation. Pump with fitted float switch for fully automatic operation.
Application
For the pumping in domestic areas of:
– Sewage not containing faeces
– Wastewater (with small amounts of sand and gravel)
Construction
Sewage pump with open multi-channel impeller and vertical threaded connection. Pump housing with strainer made of stainless steel, impeller made of composite material. 1~ motor (jacket cooling) with integrated operating capacitor and self-switching thermal motor monitoring. Stainless steel motor housing. Oil-filled sealing chamber with double sealing: a rotary shaft seal is installed on the motor side, a mechanical seal on the pump side. Connection cable with float switch and fitted plug (CEE 7/7).
Scope of delivery
– Pump
– Swing check valve, pre-assembled
– Hose connection, enclosed
– Installation and operating instructions
Operating Data
Fluid media: Water 100 %
Fluid temperature: 20.00 °C
Requested flow:
Requested head:
Max. delivery head: 11.65 m
Product data
Hydraulics type: Vortex impeller
Free ball passage of the hydraulics: 10 mm
Maximum operating pressure: 2 bar
Max. immersion depth: 7 m
Fluid temperature: 3…35 °C
Max. fluid temperature, for short periods up to 3 min.: 90 °C
Max. fluid temperature, for short periods up to 30 min.: {P.temperature_fluid_short_term_30min;;;1}
Motor data
Mains connection: 1~230V/50 Hz
Voltage tolerance: +-10 %
Power factor: 0.98
Rated power: 0.6 kW
Power consumption: 0.9 kW
Rated current: 3.6 A
Activation type: Direct On Line (DOL)
Rated speed: 2,900 1/min
Max. switching frequency: 50 1/h
Insulation class: B
Protection class: IP68
Operating mode (immersed): S1
Operating mode (non-immersed): S3-25%
Cable
Connection cable length: 10 m
Cable type: H07RN-F
Cable cross-section: 3G1
Mains plug: CEE 7/7 (Schuko)
Type of connection cable: Detachable
Equipment/function
Float switch: Yes
Explosion protection type: –
Motor protection: Bimetall
Materials
Pump housing: 1.4301
Impeller: PLC
Shaft: 1.4301
Sealing on pump side: BQ1PFF
Sealing on motor side: NBR
Gasket material: NBR
Motor housing: 1.4301
Installation dimensions
Pipe connection on the suction side: , –
Pipe connection on the discharge side: Rp 1¼, PN 10
Ordering information
Brand: Wilo
Product description: Drain TS 32/12-A
Net weight, approx.: 7.8 kg
Article number: 6043945
