Vertical wastewater pump in pedestal-type design for pumping fluids at temperatures of up to max. 95 °C. The hydraulics housing is made of cast iron and impeller made of steel. Pressure connection with horizontal pressure outlet and female thread. Drive is provided by a single-phase version standard motor that features a motor housing made of aluminium. Motor protection and connection cable are to be provided on-site. Hydraulics and motor are rigidly connected via the pump shaft (in the shaft protection pipe). The pump shaft is located by a plain bearing and the plain bearing is lubricated by the fluid. A float switch is fitted for automatic operation. Switching points can be set using stops.
Operating Data
Fluid media: Water 100 %
Fluid temperature: 20.00 °C
Requested flow:
Requested head:
Max. delivery head: 11.08 m
Product data
Hydraulics type: Open multi-channel impeller
Free ball passage of the hydraulics: 5 mm
Maximum operating pressure: 1.1 bar
Fluid temperature: 3…95 °C
Motor data
Mains connection: 1~230V/50 Hz
Voltage tolerance: +-5 %
Rated power: 0.37 kW
Power consumption: 0.57 kW
Rated current: 3.9 A
Activation type: Direct On Line (DOL)
Rated speed: 2,672 1/min
Max. switching frequency: 10 1/h
Insulation class: F
Protection class: IP55
Materials
Pump housing: 5.1301/EN-GJL-250
Impeller: 1.4028
Shaft: 1.4021
Motor housing: Aluminium
Installation dimensions
Pipe connection on the discharge side: R 1, PN 10
Ordering information
Brand: Wilo
Product description: Drain VC 32/10 (1~230 V)
Net weight, approx.: 36 kg
Article number: 2044582
