Compact, ready for connection, and fully submersible single pump lifting unit with macerator hydraulics for pumping sewage containing faeces.
Gas- and watertight collection tank with sloped floor at an angle and an inspection opening with transparent cover.Freely selectable inlets within the marked areas.Level measurement performed with an analogue output signal via reed contact and two switching points.Discharge port with non-return valve attached.
Surface-cooled motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
– Collective fault signal with potential-free contact
– Integrated and mains-independent alarm
– Adjustable follow-up time
– 1.5 m connection cable with attached plug
Scope of delivery
– Fully submersible lifting unit with macerator, switchgear, and connection cable including plug
– Pipe connection DN 32 (outer diameter 40 mm)
– HT double socket DN 40 (50 mm) for ventilation connection
– HT double socket DN 40 (50 mm) for drain connection
– Inlet set with hole saw 124 mm (5 in) and seal DN 100 (110 mm)
– Floor fixation set
– Noise insulation mat
– 9 V rechargeable battery
– Installation and operating instructions
Operating Data
Fluid media: Water 100 %
Fluid temperature: 20.00 °C
Requested flow:
Requested head:
Approved field of application
Fluid temperature: 3…40 °C
Max. fluid temperature, for short periods up to 5 min.: {P.temperature_fluid_short_term_5min;;;1}
Ambient temperature: 3…40 °C
Maximum operating pressure: 6 bar
Max. permissible pressure in the pressure pipe: 1,500 kPa
Product data
Gross volume of the tank: 21 l
Useable volume at 180 mm inlet height: 11 l
Useable volume at 250 mm inlet height: 0 l
Useable volume at 315 mm inlet height: 0 l
Sound-pressure level: 70 dB
Operating mode (non-immersed): S3-10%
Height: 458 mm
Length: 748 mm
Width: 196 mm
Diagonal dimension: 756 mm
Free ball passage of the hydraulics: 10 mm
Motor data
Mains connection: 1~230V/50 Hz
Voltage tolerance: +-10 %
Rated power: 0.75 kW
Rated speed: 2,829 1/min
Rated current: 5.6 A
Starting current – direct :
Insulation class: F
Protection class motor: IP68
Activation type: Direct On Line (DOL)
Max. switching frequency: 60 1/h
Operating mode per pump:
Motor protection: Bimetall
Cable
Connection cable length: 4 m
Cable type: H07RN-F
Cable cross-section: 4G1
Mains plug: CEE 7/7 (Schuko)
Materials
Tank: PE
Pump housing: 5.1301/EN-GJL-250
Impeller: 5.1301/EN-GJL-250
Shaft: 1.4401
Gasket material: NBR
Motor housing: 1.4301
Installation dimensions
Pipe connection on the suction side: DN 90 (90 mm), PN 0,5
Pipe connection on the discharge side: DN 32, PN 6
Connection venting: DN 50 (50 mm)
Ordering information
Brand: Wilo
Product description: DrainLift SANI CUT-S.20/M523/1-EF
Net weight, approx.: 34 kg
Article number: 6095513
