Plastic chamber as single-pump system. Suitable for ground installation or building installation.
Fluid
For collection and pumping of the following in commercial areas:
– Sewage containing faeces
Sewage pumping according to 12050
The pump chamber meets the requirements of EN 12050-1 with the specified pump.
Construction
Chamber
Pump chamber with optimised geometry for deposit-free operation. Chamber component with finning for high inherent stability and anti-buoyancy. The inlets are freely configurable. Two lifting eyes are integrated for attaching the lifting accessory. The upward curved pump chamber cover can be walked on and can be loaded with max. 200 kg. For the building installation, the pump chamber is equipped with a floor fixation.
Pipework
– Discharge pipe with threaded connection on the pump side
– Shut-off ball valve
– Non-return ball valve
Pump
Submersible sewage pump for single-phase current. Surface-cooled motor with thermal motor protection (self-switching) and plug.
Level control
The level is controlled via the float switch of the pump.
Scope of delivery
– Plastic chamber with installed pipework, pump and level control
– Pipework with shut-off ball valve and non-return valve
– Pump with float switch and plug
– Chamber cover with gasket
– HT double socket 50 mm (2 in) for evacuation connection
– Inlet set with hole saw 124 mm (5 in) and gasket DN 100
– Floor fixation
– Installation and operating instructions
Operating Data
Fluid media: Water 100 %
Fluid temperature: 20.00 °C
Requested flow:
Requested head:
Approved field of application
Fluid temperature: 3…40 °C
Max. fluid temperature, for short periods up to 3 min.:
Max. fluid temperature, for short periods up to 30 min.: {P.temperature_fluid_short_term_30min;;;1}
Ambient temperature: 3…40 °C
Maximum operating pressure: 1.2 bar
Max. permissible pressure in the pressure pipe: 1,500 kPa
Product data
Gross volume of the tank: 255 l
Switching volume: 65 l
Operating mode (non-immersed): S3-20%
Height: 1,042 mm
Length: 800 mm
Width: 650 mm
Diagonal dimension: 1,280 mm
Motor data
Mains connection: 1~230V/50 Hz
Voltage tolerance: +-10 %
Rated power: 0.6 kW
Rated speed: 2,900 1/min
Rated current: 4.1 A
Insulation class: F
Protection class motor: IP68
Cable
Connection cable length: 5 m
Cable type: H07RN-F
Cable cross-section: 3G1
Mains plug: CEE 7/7 (Schuko)
Materials
Tank: PE
Pump housing: EN-GJL-200
Impeller: PK-GF30
Shaft: 1.4301
Motor housing: 1.4301
Installation dimensions
Pipe connection on the suction side: DN100 / DN150, –
Pipe connection on the discharge side: Ø63/G2½”A, PN 1,5
Connection venting: Ø 75
Ordering information
Brand: Wilo
Product description: DrainLift WS 50E BASIC/MINI3 V04/M06-523
Net weight, approx.: 59 kg
Article number: 2552864
