Multistage, horizontal centrifugal pump in glanded pump design, not self-priming, with directly flanged motor and automatic pump control HiControl 1. The shaft bushing is sealed by a maintenance-free, force-flushed mechanical seal.
For pumping and pressure boosting of drinking water or slightly muddy water in the residential, agricultural and other areas.
Water supply from wells, rainwater storage tanks for irrigation, sprinkling, pressure boosting etc.
2-pole single-phase motor with threaded cable gland, capacitor in the connection box, motor protection switch with automatic reactivation, low-water cut-out switchgear.
Scope of delivery
– Pump
– HiControl 1 pump control
– Two plastic connectors with seals for manually connecting to the inlet pipe
– A quick electrical connection
– Installation and operating instructions
Materials
Shaft: 1.4021
Shaft seal: BVPFF
Gasket material: EPDM
Stage chamber material: PPE/PS-GF30
Operating Data
Fluid media: Water 100 %
Fluid temperature: 20.00 °C
Fluid concentration: 100.00 %
Requested flow:
Requested head:
Min. fluid temperature: 0 °C
Max. fluid temperature: 40 °C
Maximum operating pressure: 8 bar
Discharge port: G 1, PN 10
Max. ambient temperature: 40 °C
Motor data
Mains connection: 1~230V/50 Hz
Voltage tolerance: +10/-15 %
Rated power: 0.6 kW
Rated current: 3.8 A
Rated speed: 2,900 1/min
Insulation class: F
Protection class: X4
Installation dimensions
Pipe connection on the suction side: G 1, PN 8
Pipe connection on the discharge side: G 1, PN 10
Ordering information
Net weight, approx.: 10.7 kg
Brand: Wilo
Product description: HiMulti 3C1-44
Article number: 2543607
